Welcome To Evlithium
Best Store For Lithium Iron Phosphate (LiFePO4) Battery
 Winston Battery
 Thunder Sky Winston Batteries
 CALB Battery
 CALB Cells
 Sinopoly Battery
 CATL Battery
 LiFePO4 Battery
 Forklift Lithium Battery
 Forklift Battery Charger
 Fortune LiFePO4 Battery
On Board Charger
 LiFePO4 Charger
 Battery Balancer
 GBS Battery
 EVE Battery
 Lithium RV Battery
 Headway Battery
 Lithium Titanate Battery LTO
 A123 Battery
 Battery Management System
 TC Charger
 EV-Cable
  Contact Us


info@evlithium.com

evlithium8@gmail.com

Skype: zhangleiytu





Home > Hot Product>2.4V 1300mah LTO lithium titanate 18650 battery cell

2.4V 1300mah LTO lithium titanate 18650 battery cell


lithium titanate batterylto 18650 battery

LTO 18650 battery cell Component


This lto 18650 battery cell is of cylindrical lithium titanate cell which is composed of positive and negative electrode,
separator, electrolyte and metal case etc.

Cell Specification

No.

Item

Parameters

Remark

1

Appearance

Consistent with appearance inspection standard

There should be no such defects as flaw,
crack, rust, leakage, which may
depreciate
 the commercial value of cell.

2

Nominal Capacity

1.3Ah

1C room temperature1.3Ah

3

Nominal Voltage

2.4V

1C discharge platform

4

Internal Impedance

18m

Internal resistance measured at AC 1kHz after 50% charged.

5

Standard Charge Cut-off
Voltage

2.8V

6

Standard Discharge Cut-off

Voltage

1.5V

7

Maximum Continuous Charge Current

5I16.5A

255

8

Maximum Continuous
Dis
charge Current

10I113A

255

9

Operating Temperature
Range

Temperature:-40~60

Humidity85%RH

Recommended charge/discharge current 0.5 I1 (0.7A), when cell temperature is lower than 0Recommended cool the
cell, when cell
 temperature is higher than 50.

10

Storage Temperature Range

-5~28

Recommend253)

90%RH storage moisture range.

11

Weight

41.0g1g

12

Cycle Life

10000 cycles(80%DOD)


Cell Size

lto lithium titanate battery


Period of Warranty and Product Liability


Warranty period of this product is 180 days from manufacturing code. We guarantee to give a replacement in case of cells with defects proven due to the manufacturing process instead of abuse and misuse by the customers,  
otherwise, the company are not promised free replacement.


Storage


The cell shall be stored in the clean and dry ventilation room at the temperature of -5
28 and shall be kept out of fire or heat and avoid touching corrosion elements. The cell should be stored with 10%~30% charged condition. We recommend that cells should be charged about once per half a year to prevent over-discharge.


Shipment Requirement


The cell should be packed in cartons under the condition of 30%SOC and at the temperature of -5
28 charged for shipment. The violent vibration, impaction or squeezing should be avoided in the transport process; Avoid to be exposed to the sun and rain. The cells shall be shipped by normal transportation such as by road, by 
train, by ocean or by air.






Next News: Shoto SDA10-4850 48V50AH 2.4Kwh LiFePO4 Battery

Previous: CATL 3.2V 310Ah LiFePO4 Prismatic Battery