Welcome To Evlithium
Best Store For Lithium Iron Phosphate (LiFePO4) Battery
lithium battery supplier
Home > TC Elcon Charger>2KW On Board Battery Charger

24V 48V 60V 72V 2KW On Board Battery Charger



2kw on board battery Charger      OBC On Board Battery Charger



The battery charger adopts fully closed pouring and sealing heat-conducting silica gel process, with protection grade up to IP67, good shock resistance, good heat dissipation performance and long service life.The products are applicable to lithium battery, lead-acid battery, nickel metal hydride battery, etc., and can be used for battery pack cycle charging of electric vehicles, motorcycles, sightseeing vehicles, forklifts, logistics vehicles, golf carts, ships, communication equipment, etc.



Item No.

Input Voltage range

Output Rated Voltage

Max output voltage

Max output current

SMCZ2-2440A

AC180-264V

24V

33.0V

40A

SMCZ2-4835A

AC180-264V

48V

66.0V

35A

SMCZ2-6030A

AC180-264V

60V

82.5V

30A

SMCZ2-7225A

AC180-264V

72V

99.0V

25A

SMCZ2-4825C

AC90-264V

48V

66.0V

25A

SMCZ2-6018A

AC90-264V

60V

82.5V

18A

SMCZ2-7215A

AC90-264V

72V

99.0V

15A







Technical Parameters 

Item

Parameters

AC Input Wide Voltage, Range

AC90V~264V

AC Input Frequency Range

40~70Hz

With APFC Function, Power Factor

íŢ0.98

Soft Switching Technology, Efficiency

íŢ93%

Protection Level

IP67

Operating Temperature

-40íŠ~60íŠ

Storage Temperature

-55íŠ~100íŠ

CAN Communication Function

Optional

12V3A Auxiliary Power Supply

Optional

LED Light Indicator For Charging Process

Standard

Noise

í▄45dB

Overall Size

282*169*90mm

Net Weight

3.8Kg



Protection Function


1.Overheat Protection
 
When the internal temperature of the charger exceeds 80íŠ, the charging current will reduce automatically. When it exceeds 85íŠ, the charger shut down for protection. When the temperature drop, the charger antomatically resumes to charge.

2.Short Circuit Protection
   
When the output short circuit, the charger will automatically shut down the output. After troubleshooting, the battery can be reconnected to resume charging.

3.Battery Reverse Connection Protection

When the battery is reverse connected, the internal circuit of the charger will automatically disconnect from the battery, without charging, without damaging the charger.

4.Input low-voltage &Over-voltage Protection

If the input voltage is lower than 90V or higher than 264V, the charger will shut down protectively and automatically resume working with the voltage is normal again.

5.Full Automatic Shutdown

Automatically shut down after full charge.


Home
Page
Inquiry top TOP