12V 24V 36V 48V 60V 72V 1.5KW On Board LiFePO4 Battery Charger

The battery charger adopts fully closed pouring and sealing heat-conducting silica gel process, with protection grade up to IP67, good shock resistance, good heat dissipation performance and long service life.The products are applicable to lithium battery, LiFePO4 battery, lead-acid battery, nickel metal hydride battery, etc., and can be used for battery pack cycle charging of electric vehicles, motorcycles, sightseeing vehicles, forklifts, logistics vehicles, golf carts, ships, communication equipment, etc.

Item No.	Input Voltage range	Output Rated Voltage	Max output voltage	Max output current
SMCZ1-1225A	AC180-264V	12V	16.5V	25A
SMCZ1-2430A	AC180-264V	24V	33.0V	30A
SMCZ1-3625A	AC180-264V	36V	49.5V	25A
SMCZ1-4825A	AC180-264V	48V	66.0V	25A
SMCZ1-6020A	AC180-264V	60V	82.5V	20A
SMCZ1-7218A	AC180-264V	72V	99.0V	18A
SMCZ1-2430C	AC90-264V	24V	33.0V	30A
SMCZ1-3623C	AC90-264V	36V	49.5V	23A
SMCZ1-4818C	AC90-264V	48V	66.0V	18A
SMCZ1-6013C	AC90-264V	60V	82.5V	13A
SMCZ1-7212C	AC90-264V	72V	99.0V	12A

Technical Parameters

Item	Parameters
AC Input Wide Voltage, Range	AC90V~264V
AC Input Frequency Range	40~70Hz
With APFC Function, Power Factor	≥0.98
Soft Switching Technology, Efficiency	≥93%
Protection Level	IP67
Operating Temperature	-40℃~60℃
Storage Temperature	-55℃~100℃
CAN Communication Function	Optional
12V3A Auxiliary Power Supply	Optional
LED Light Indicator For Charging Process	Standard
Noise	≤45dB
Overall Size	28214682mm
Net Weight	2.7Kg

Protection Function

1.Overheat Protection

When the internal temperature of the charger exceeds 80℃, the charging current will reduce automatically. When it exceeds 85℃, the charger shut down for protection. When the temperature drop, the charger antomatically resumes to charge.

2.Short Circuit Protection

When the output short circuit, the charger will automatically shut down the output. After troubleshooting, the battery can be reconnected to resume charging.

3.Battery Reverse Connection Protection

When the battery is reverse connected, the internal circuit of the charger will automatically disconnect from the battery, without charging, without damaging the charger.

4.Input low-voltage &Over-voltage Protection

If the input voltage is lower than 90V or higher than 264V, the charger will shut down protectively and automatically resume working with the voltage is normal again.

5.Full Automatic Shutdown

Automatically shut down after full charge.

Previous：
36V 10A LiFePO4 Battery Charger

Next：
2KW On Board Battery Charger