Welcome To Evlithium
Best Store For Lithium Iron Phosphate (LiFePO4) Battery
lithium battery supplier
Winston Battery
ThunderSky Winston Battery
CALB Battery
CALB Cells
Sinopoly Battery
CATL Battery
LiFePO4 Battery
Forklift Lithium Battery
Forklift Battery Charger
Fortune LiFePO4 Battery
On Board Charger
LiFePO4 Charger
Battery Balancer
GBS Battery
EVE Battery
Lithium RV Battery
Headway Battery
Lithium Titanate Battery LTO
A123 Battery
Battery Management System
TC Elcon Charger
EV-Cable
Contact Us


info@evlithium.com

evlithium8@gmail.com

Skype: zhangleiytu






Home > Hot Product>Fortune LiFePO4 Battery 3.2V 100Ah Prismatic Cell

Fortune LiFePO4 Battery Cell has the characteristics of fast charging, high energy storage, ultra low impedance, ultra high energy ratio and energy storage efficiency. It is safer, more environmentally friendly, more stable and more efficient.



3.2v 100ah lifepo4 battery cells

Fortune LiFePO4 Battery 3.2V 100Ah Prismatic Cell


Nominal Voltage: 3.2V
Nominal Capacity: 100Ah
Operating Voltage: 2.22V~3.65V
Max. Charging Current: 1C
Max. Discharging Current: 2C
Dimension: 290(
H
)*130(W)*36(T) mm





Parameter

CapacityAh

100

Product category

Prismatic aluminum case

Thicknessmm

36

Width(mm)

130

Height(mm)

290

Nominal voltage(V)

3.2

WeightKg

2.7

Standard current dischargeA

0.5C

Operating voltage range(V)

2.23.65

Operating temperature range()

-2055

Maximum charge rate (Continued)

1C

Maximum discharge rate (Continued)

2C

Cycle lifetimes

80%DOD2500 times


We provide busbars, nuts and battery holders for custmomers who use 100ah fortune lifepo4 battery cells DIY battery packs.

The holders can not only facilitate the installation of the battery modules, but also ensure the gap between the batteries, prevent the battery expansion, and help the battery heat dissipation to improve the performance of batteries.

100ah lifepo4 battery USA
fortune lifepo4 batteryfortune lifepo4 battery cells
Precautions and Safety Instructions

1 Standard cell Precautions

a. Do not expose the cell to extreme heat or flame.
b. Do not short circuit, over-charge or over-discharge the cell.
c. Do not subject the cell to strong mechanical shocks.
d. Do not immerse the cell in water or sea water, or get it wet..
f. Do not disassemble or modify the cell.
g. Do not handle or store with metallic like necklaces, coins or hairpins, etc.
h. Do not use the cell with conspicuous damage or deformation.
i. Do not connect cell to the plug socket or car-cigarette-plug.
j. Do not make the direct soldering onto a cell.
k. Do not touch a leaked cell directly.
l. Do not use for other equipment.
m. Do not use Lithium-ion cell in mixture.  
n. Do not use or leave the cell under the blazing sun (or in heated car by sunshine).
o. Keep cell away from children.
p. Do not drive a nail into the cell, strike it by hammer or tread it.
q. Do not give cell impact or fling it.

2.Cell Operation Instructions

2.1 Charging

a. Charge the cell in a temperature range of 0C to + 50C.
b. Charge the cell at a constant current of 0.3Cuntil 3.65V, and then at a constant voltage of 3.65V until 0.05C. Charge rates greater than 1C are NOT recommended. (C : Rated Capacity of cell)
c. Use a constant current, constant voltage (CC/CV) lithium-ion (Li+) cell charge controller.
d. Do not continue to charge cell over specified time.

2.2 Discharging

a. Recommended cut-off voltage to 2.2V. Recommended max continuous discharge current is 3C
b. For maximum performance, discharge the cell in a temperature range of -20C to +50C.

2.3 Storage Recommendations

In case of long period storage (more than 3 months), storage the cell at temperature range of C10 ~ +45C, low humidity, no corrosive gas atmosphereNo press
on the cellAnd more than 3 months need to put a charge according to the standard charge and discharge process


Next News: 2020 CALB Brand New Models LiFePO4 Battery Cells

Previous:  
Headway LiFePO4 Cylindrical 38120S 3.2V 10Ah Battery Cell

Home
Page
Inquiry top TOP