Home > TC Elcon Charger>13Kw three-phase On Board Lithium Battery OBC Charger

13Kw three-phase On Board Lithium Battery OBC Charger

TC Elcon Charger

13Kw 80V160A 108V120A 144V88A 360V36A 540V24A 700V18A On Board Lithium Battery OBC Charger for New Lithium Battery Electric Logistics Vehicles, Buses, and Construction Machinery

Individual pricing for large scale projects and wholesale demands is available.

Mobile/WhatsApp/Wechat: +86 156 0637 1958
Email: info@evlithium.com

Description

RA13P0 series air-cooled vehicle charger is designed for new lithium electric pure electric logistics vehicles, buses, construction machinery and other new energy models research and development of a high power density and high efficiency charger, using modular, standardized, universal design ideas design and development. The charger supports three-phase AC input, and the DC output voltage is adjustable in a full range.
The product adopts full digital control technology design, flexible and intelligent control, good protection characteristics, and strong system robustness. Its own microprocessor communicates with the monitoring unit, and the parameters in the machine CAN be set or adjusted by the upper monitoring unit through the CAN interface.
It has multiple protection functions such as input over-voltage protection, output over-current protection, output over-voltage protection, output short-circuit protection, and over-temperature protection.

Models

Model	Input voltage	output rating	Rated output voltage	Output voltage range	Output Current Range

RA13P0700	90~265VAC	13KW	700VDC	0-850VDC	0-18A
RA13P0540	90~265VAC	13KW	540VDC	0-720VDC	0-24A
RA13P0360	90~265VAC	13KW	360VDC	0-500VDC	0-36A
RA13P0144	90~265VAC	13KW	144VDC	0-180VDC	0-88A
RA13P0108	90~265VAC	13KW	108VDC	0-135VDC	0-120A
RA13P0080	90~265VAC	13KW	80VDC	0-105VDC	0-160A

Electrical Characteristics

Model
Vehicle power Supply type	Air cooled car charger assembly
Power supply type	RA13P0700	RA13P0540		RA13P0360		RA13P0144		RA13P0108		RA13P0080
input characteristics
Rated input voltage	380VAC three-phase five-wire system (the middle line must be reliably connected) The output power is 3.3KW when the input is 220V single-phase
input voltage range	380VAC
Rated input voltage frequency	50Hz
Input frequency range	45～65Hz
inrush starting current	≤45A
Input power factor	≥0.99（@380Vin,Pomax）
output characteristics
output rating	10KW
Output voltage range V	0-850		0-720		0-500		0-180		0-135		0-105
Output current range A	0-18		0-24		0-36		0-88		0-120		0-160
Voltage regulation accuracy	±1%
precision of steady current	±0.5A（Io≤10A）&≤±5%（Io>10A）
ripple coefficient of voltage	≤1%
Output response time	≤200mS
Typical efficiency	94%		94%		94%		92%		92%		92%
protective feature
Over and under-voltage protection	Input over and under-voltage shutdown can be self-recovery, output over and under voltage shutdown can be self-recovery.
Output reverse connection and short circuit protection	Output short circuit, reverse connection shutdown, self-recovery
over-temperature protection	When the heat sink temperature is higher than 75 ° C, reduce the output power, disconnect the circuit when the temperature is higher than 95 ° C, and restore the output when the charging temperature is lower than 85 ° C
environmental conditions
operating ambient temperature	-40 ° C ~ +65 ° C (Automatic derating operation when the ambient temperature is high)
storage temperature	-40～95℃
humidity	5%～95%
IP code	IP67
Cooling function	forced cooling
communicating function	CAN bus control system
Charging function	Receive charging instructions to charge normally; No command charger is in the standby state

Details

Dimensions

Warning

The input/output end of the power supply should be supplemented with a blown fuse or other overcurrent protection device;

The possible electrical hazards at the output end of the product must be considered to ensure that the end product user will not come into contact with the product; The manufacturer of the terminal equipment must design the appropriate protection scheme to ensure that the operation will not cause danger due to accidental contact of the engineer or tool with the source terminal;

Once the safety protection of the equipment is damaged, the equipment must stop working and refer to the relevant maintenance regulations.

When the power supply device is switched from a cold environment to a warm environment, condensation may cause leakage hazards, so the grounding requirements must be strictly implemented.

Only a qualified person can connect the equipment to the power supply.

The power supply must be shut down for five minutes, so that the capacitor has sufficient discharge time before the power supply equipment can be maintained.

Pay attention to the use of safety: there are safety warning signs, high pressure signs, avoid hand contact, so as to avoid electric shock, burns.

Previous：10Kw AC DC three-phase On Board Lithium Battery OBC Charger

Next：20Kw DC DC on board battery charger Air-cooling OBC charger