 |
Welcome To Evlithium Best Store For Lithium Iron Phosphate (LiFePO4) Battery |
 |
Individual pricing for large scale projects and wholesale demands is available.
Mobile/WhatsApp/Wechat: +86 156 0637 1958
Email: info@evlithium.com
-Multiple communication interfaces RS232,RS485,CAN,Bluetooth
-IP21 protection, indoor application
-Use of parallel connection: from 2 to 16 modules
-Multiple protection Lifepo4 material, BMS, and breaker, safe and long life
-Compatible with DEYE, Luxpower, Goodwe, Growatt, SMA, Solis, Voltronic, etc
| Items | Parameters |
|---|---|
| Battery model | 51.2V306Ah (IFR-3.2V-16S1P) |
| Nominal voltage | 51.2V |
| Nominal capacity | ≥306Ah (At 0.5C discharge rate) |
| Discharge | Standard discharge current: 153A |
| Max. discharge current: 200A | |
| Cut-off voltage: 40V | |
| Charge | Charge Voltage: 58.4V |
| Standard charging current: 153A | |
| Max. charging current: 200A | |
| Charging mode: Constant Current/Constant Voltage | |
| Charge cut-off current: 6.12A | |
| Operation Temperature | Charge: 0≧~+60≧ |
| Discharge: -20≧~+60≧ | |
| Storage Temperature | 0≧~+35≧ |
| Discharging Inner Resistance | ≤15mΩ |
| Protection Function | Protection functions such as overcharge, over-discharge, over-current, short circuit, and equalization |
| Output mode | Barrier terminal block |
| Communication mode | CAN/485 |
| Case Material | Iron shell |
| Weight | About 108Kg |
| Dimensions(L*W*H) | 400*276.5*816mm |
| Cycle | ≥10000, and the capacity retention rate is 70%. (1C charge-discharge) |
| No. | Name | Silk-screen | Remark |
|---|---|---|---|
| 1 | Negative | - | M8 screw nut/Black |
| 2 | Positive | + | M8 screw nut/Red |
| 3 | SOC LED | SOC | State of Charge |
| 4 | ALM LED | ALM | Operation indicator |
| 5 | RUN LED | RUN | Alarm indicator |
| 6 | Reset Switch | RST | Set the battery address |
| 7 | CAN/RS485 | CAN | Battery and inverter Communication port |
| 8 | RS485 parallel port | RS485A RS485B | Parallel communication port |
| 9 | LCD | / | Display of battery info. |
| 10 | Power button | ON/OFF |
It is very important and necessary to read the user guide carefully before installing or using the battery. Failure to follow any of the instructions or warnings in this document can result in electrical shock, serious injury, death, or damage to the battery and the whole system.
＃ Do not short-circuit the positive and negative terminals with wires or metal objects.
＃ If the battery is stored for a prolonged period, it must be charged every three to six months, with the SOC maintained at no less than 60%.
＃ The battery must be recharged within 12 hours after being fully discharged.
＃ Do not leave cables exposed.
＃ All battery terminals must be disconnected before performing maintenance.
＃ Do not use cleaning solvents to clean the battery.
＃ Do not expose the battery to flammable or corrosive chemicals or vapors.
＃ Do not paint any part of the battery, including any internal or external components.
＃ Do not connect the battery directly to PV solar wiring.
＃ Do not insert any foreign objects into any part of the battery.
＃ Any direct or indirect damage caused by the above actions is excluded from the warranty.
All Rights reserved © 2026 Evlithium Limited