Welcome To Evlithium
Best Store For Lithium Iron Phosphate (LiFePO4) Battery
lithium battery supplier
Home > Fortune LiFePO4 Battery>Fortune Battery 100Ah

Fortune LiFePO4 Battery 3.2V 100Ah Prismatic Cell



fortune lifepo4 batteryfortune lifepo4 battery




Features of Fortune LiFePO4 Battery cells:


  • 4,000 cycles at 80% Depth of Discharge at 0.5C
  • 6C 600A Pulse Peak Current10s)Built with the safest Lithium Iron Phosphate chemistry in prismatic aluminum cells
  • Nanometer LiFePO4 cathode ensures durability, higher power output performance, and superior low temperature performance
  • 2C constant discharge rate outperforms normal 1C rate batteries
  • Consistency of each individual cell maximizes packs capacity
  • Copper stud terminal design, no welding needed, can use an impact gun 
  • Built to last, ideal for powering heavy-duty industrial vehicles and machines



Item

Parameters

CapacityAh

102Ah

Nominal voltage(V)

3.2

Energy

326Wh

Dimension

130*36*290mm

WeightKg

2.7

Terminal Type

M10 Copper Nickel Bolt

DC Resistance

1m

Standard current dischargeA

0.5C

Operating voltage range(V)

2.23.65

Operating temperature range()

-2055

Maximum charge rate (Continued)

1C

Maximum discharge rate (Continued)

2C

Max Peak Current (for 5 seconds)

5C

Cycle lifetimes

80%DOD2500 times


We provide busbars, nuts and battery holders for custmomers who use 100ah fortune lifepo4 battery cells DIY battery packs.


The holders can not only facilitate the installation of the battery modules, but also ensure the gap between the batteries, prevent the battery expansion, and help the battery heat dissipation to improve the performance of batteries.

100ah lifepo4 battery USA
fortune lifepo4 batteryfortune lifepo4 battery cells



dimension of fortune lifepo4 battery


PERFORMANCE CURVES

curve-1curve-1

curve-3curve-4





Precautions and Safety Instructions


1 Standard cell Precautions

a. Do not expose the cell to extreme heat or flame.
b. Do not short circuit, over-charge or over-discharge the cell.
c. Do not subject the cell to strong mechanical shocks.
d. Do not immerse the cell in water or sea water, or get it wet..
f. Do not disassemble or modify the cell.
g. Do not handle or store with metallic like necklaces, coins or hairpins, etc.
h. Do not use the cell with conspicuous damage or deformation.
i. Do not connect cell to the plug socket or car-cigarette-plug.
j. Do not make the direct soldering onto a cell.
k. Do not touch a leaked cell directly.
l. Do not use for other equipment.
m. Do not use Lithium-ion cell in mixture.  
n. Do not use or leave the cell under the blazing sun (or in heated car by sunshine).
o. Keep cell away from children.
p. Do not drive a nail into the cell, strike it by hammer or tread it.
q. Do not give cell impact or fling it.

2.Cell Operation Instructions

2.1 Charging

a. Charge the cell in a temperature range of 0C to + 50C.
b. Charge the cell at a constant current of 0.3Cuntil 3.65V, and then at a constant voltage of 3.65V until
    0.05C. Charge rates greater than 1C are NOT recommended. (C : Rated Capacity of cell)
c. Use a constant current, constant voltage (CC/CV) lithium-ion (Li+) cell charge controller.
d. Do not continue to charge cell over specified time.

2.2 Discharging

a. Recommended cut-off voltage to 2.2V. Recommended max continuous discharge current is 3C
b. For maximum performance, discharge the cell in a temperature range of -20C to +50C.

2.3 Storage Recommendations

In case of long period storage (more than 3 months), storage the
cell at temperature range of C10 ~ +45C, low humidity, no corrosive gas atmosphereNo press
on the cellAnd more than 3 months need to put a charge according to the standard charge and
discharge process



Home
Page
Inquiry top TOP