JK BMS 8-20S 60A battery board management system smart lipo/lto/lifepo4 bms for lithium battery pack

This product is suitable for 8~20S large capacity of lithium cobalt acid, lithium manganate, ternary lithium, lithium iron phosphate battery pack, continuous discharge current 60A, homeopathic discharge current 120A.

Featurs

Active balance function, balance cell differential pressure without energy loss, improve the battery's efficiency by 95%.
It can be used for 8~20S ternary lithium, lithium cobalt acid, manganese acid, and lifepo4 pack.
The continuous operating current is 60A, and the active equalization current is adjustable from 0.1-0.6A.
With over charge, over discharge, over current, short circuit protection functions.
Single voltage range 1~5V, accuracy ±5mv.
With the function of the coulomb meter, the remaining power at a glance
Bluetooth communication function, equipped with app, can real-time check the battery status.
Provides RS485 and CAN communication interface.
GPS remote positioning module Optional.

Specifications

Technical Index	Product model
	BD6Al7S6P	8D6A20S6P
Ternary lithium	7-17	7-20
LiFeP04	8-17	8-20
Lithium Titanate	13-17	13-20
Balance mode	Active equilibrium
Equalizing current	0.6A
Main circuit conduction internal	l.3mΩ
Continuous discharge current	60A	60A
Maximum Discharge current	100A	100A
Charging current	I0-60A	10-60A
Other interfaces (customized)	RS485/can display interface
Entry cable	Same port
Single voltage range	I-SY
Voltage acquisition	±5mV
Overcharge Protection voltage	1.2-4.35 V adjustable
Over charge release voltage	1.2-4.35 V adjustable
Discharge Time of charging	2~ 120S as adjustable
Over discharge Protection voltage	1.2-4.35 V adjustable
Over discharge recovery voltage	1.2-4.35 V adjustable
Number of temperature	3 ↑
Temperature protection	yes
Short circuit protection	yes
Coulomb meter	yes
Bluetooth function	Support Android and IOS
GPS remote (optional)	RS485/GPS

Previous：
200A/250A Smart BMS 4S LiFePO4 For 12V LiFePO4 Battery

Next：
8S 24V LiFePO4 Battery BMS