Welcome To Evlithium
Best Store For Lithium Iron Phosphate (LiFePO4) Battery
lithium battery supplier
Winston Battery
ThunderSky Winston Battery
CALB Battery
CALB Cells
Sinopoly Battery
CATL Battery
LiFePO4 Battery
Forklift Lithium Battery
Forklift Battery Charger
Fortune LiFePO4 Battery
On Board Charger
LiFePO4 Charger
Battery Balancer
GBS Battery
EVE Battery
Lithium RV Battery
Headway Battery
Lithium Titanate Battery LTO
A123 Battery
Battery Management System
TC Elcon Charger
EV-Cable
Contact Us


info@evlithium.com

evlithium8@gmail.com

Skype: zhangleiytu






Home > LiFePO4 Battery and LiFePO4 cells>Great Power Battery 3.2V 100Ah LiFePO4 Cell

Great Power Battery 3.2V 100Ah lifepo4 battery cell



100ah lifepo4 battery cell100ah lifepo4 battery cell

GREAT POWER BATTERY GSP34135214F 100ah 3.2V Long-shelf-life LFP Battery for Containerized ESS


Features


· High energy density                   
· High voltage     
· Wide range of operation temperature         
· Long storage life



parameters


No.

Items

Specifications

Remark

1

Material system

Lithium iron phosphate

2

Nominal Capacity

100Ah

0.33C Standard discharge

3

Minimum Capacity

100Ah

4

Nominal Voltage

3.2V

Mean Operation Voltage

5

Delivery voltage

3.00~3.20V

Within 10 days from Factory

6

Charge Voltage

3.65V±0.03V

By standard charge method

7

Standard charging method

0.33C constant current,3.65V constant

voltage charge to 3.65V,continue

charging till current deadline to ≤0.05C,

/

8

Standard discharging method

0.33C constant current discharge to 2.5V,

/

9

Cell Internal Impedance

≤0.7mΩ

Internal resistance measured at AC 1KHZ after 50% charge

10

Weight

2.04±0.05Kg

11

Max Continuous Charge Current

1.0C

Single Cell25

12

Max Continuous Discharge Current

1.0C

Single Cell25

13

Cycle Life RT

4000 cycles

≥80% of initial capacity



Details

3.2v 100ah100ah lifepo4 battery cell
Details of 100ah lifepo4

Notice for Assembling Battery Pack


Shocks, high temperature, or contacts of sharp edge components should not be allowed in battery pack 

Cell connection


1) Direct soldering of wire leads or devices to the cell is strictly prohibited.
2) Lead tabs with pre-soldered wiring shall be spot welded to the cells. Direct soldering may cause damage of components, such as separator and insulator, by heat generation

Prevention of short circuit within a battery pack


Enough insulation layers between wiring and the cells shall be used to maintain extra safety protection. The battery pack shall
be structured with no short circuit within the battery pack, which may cause generation of smoke or firing. 
Prohibition of disassembly

1) Never disassemble the cells
The disassembling may generate internal short circuit in the cell, which may cause gassing, firing, explosion, or other
problems.
2) Electrolyte is harmful
LIP battery should not have liquid from electrolyte flowing, but in case the electrolyte come into contact with the skin, or eyes, physicians shall flush the electrolyte immediately with fresh water and medical advice is to be sought.

Prohibition of dumping of cells into fire


Never incinerate nor dispose the cells in fire. These may cause explosion of the cells, which is very dangerous and is prohibited. 

Prohibition of cells immersion into liquid such as water
The cells shall never be soaked with liquids such as water, seawater, drinks such as soft drinks, juices, coffee or others. 

Prohibition of use of damaged cells


The cells might be damaged during shipping by shock. If any abnormal features of the cells are found such as damages in a plastic envelop of the cell, deformation of the cell package, smelling of an electrolyte, an electrolyte leakage and others, the cells shall never be used any more. The Cells with a smell of the electrolyte or a leakage shall be placed away from fire to avoid firing or explosion. 

Home
Page
Inquiry top TOP